With the increasing growth of wireless technology, there’re also plenty chances for lipo battery. The world has becoming more and more wireless as the development of  Internet of Things such as bluetooth. Not only consumer or industrial wireless device, both of them expand rapidly.Wireless technology has been applied to various of areas. Compared with other battery, lipo battery is more potential choice for wireless technology for its long service life under different environmental conditions.

Lipo Battery LP882934 for Wireless Device

 

Our lithium polymer battery is used for wireless device which is made in Europe. The lithium polymer battery LP882934/LP803132/LP803030 can hold for a long time to keep sending data. The woireless device is made under GPS to 20Hz, records the proformance data will be sent to server and made accessible to authorized users via PC, iPad, iPhone and other web applications. You can check and analyze all the information. The application is accessible using a browsers such as PC, tablet or smart phones.

Specs

Battery TypeLiPo Battery
Part NumberLP882934
Capacity850mAh
Dimension34 x 29 x 8.8mm
Connector Body-
Connector Pins-
WiresAWG 26, 50mm x 2
Working Voltage2.5V to 4.2V
NTC (Thermistor)-
Charge Temperature0°C to +45°C
Disharge Temperature-20°C to +60°C
Storage Temperature-20°C to +45°C

Similar Lipo Battery

Lipo BatteryDimension(mm)Capacity(mAh)
LP80313232x31x8.0800
LP80303030x30x8.0720

LiPo Battery LP703048 for Wireless Installation

Wireless installation
Indoor and outdoor control all the time to see
Suitable for a new or existing uhrenanlagen extension
AirTime is a professional installation of 868 times, but it’s no problem with LiPo Battery LP703048

The irritating part is unpleasant, costly and time-consuming, expensive accounted for kabelverlegungen.
The watch can be moved to another location in the extension or installation.
Not only need a hauptuhr transmitter for DCF 77, GPS or TCP / IP connection of antenna.
Battery operated to about 3 or 5 years by LiPo Battery LP703048 and 10 years of mignonzellen with the liPo Battery is about 30 ~ 80 cm or 230 volt supply.
Install:
A modern time can not be installed by cable. You can save trouble, unpleasant and carefully installation, accurate positioning and planning to watch, you can change the simple review.
Range:
Supply adjustable transmitter power to achieve the maximum performance of a liebige clock number of 500 megawatts to about 250 meters in radius and indoor (5 km freilandbereich). However, these data are based on the nature of the building. Besides, other clock repeater provided in a simple way, can increase the range of Cher to achieve.
Time synchronization of transmitter.
The transmitter can be through an external GPS antenna, DCF 77, or through the Ethernet TCP/IP protocol, so that all of the clock control. TCP/IP does not need the transmission time.
Transmitter clock and power supply:
A watch with a 230 volt battery of about 3 meters or 2 years of usage. In addition, we supply about 5 years and 10 years of analog watch on the lithium battery life, 30 to 90 cm in diameter. The transmitter is through a power supply.
All we invest you airtime 868 wireless components, we need time. We are pleasured to inform you. We are happy to give you a quotation if you ask.

Specs

Part NumberLP703048
Capacity1000mAh
Voltage3.7V
WiresAWG 26, 50mm x 2pcs
Protection Circuit Overdischarge Trip Voltage3.0V
Dimension7.0 x 30 x 48mm
Charge Temperature0°C to +45°C
Disharge Temperature-20°C to +60°C
Storage Temperature-20°C to +45°C

Similar Lipo Battery

Lipo BatteryDimension(mm)Capacity(mAh)
LP80313232x31x8.0800
LP80303030x30x8.0720

LiPo Battery LP302225 for Wireless Installation AHRS

The combination of LiPo Battery LP302225 and state-of-the-art sensing technology makes the Attitude Heading Reference System (AHRS) compact, wireless and low energy consumption.

AHRS is a multifunctional system for data acquisition in a multipurpose fashion. It has Flash storage on board, wireless connectivity (Bluetooth), automated power on/off functions and regulated rechargeable power. With an selectable High Dynamic Range (HDR) configuration, AHRS can be used in applications where high-g accelerations and/or high-dps rotations are required for accurate measurements.

LiPo battery is currently considered the best electric power source available for use in AHRS. It is significantly much lighter than other kinds of batteries and it has higher capacity for the same dimension. LiPo Battery is a thinner and lighter one that is easy to build in AHRS and work for a longer time.

 

Specs

Part NumberLP302225
Capacity3.7V @ 135mAh
Configuration1S1P
WiresAWG30mm 30mm
Protection Circuit Overdischarge Trip Voltage3.0V
Thermistor (NTC)103AT
Dimension3.0 x 22 x 25mm
Charge Temperature0°C to +45°C
Disharge Temperature-20°C to +60°C
Storage Temperature-20°C to +45°C

Similar Lipo Battery

Lipo BatteryDimension(mm)Capacity(mAh)
LP3820243.8 x 20 x 24155
LP40202244.0 x 20 x 24165
LP40222254.0 x 22 x 25155

LiPo Battery LP902360 1100mAh for Digital Wi-fi Microscopes

 

 

Digital Wi-fi Microscopes is a innovative handle microscope with Wi-Fi wireless transmission powered by LiPo Battery LP902360 3.7V @ 1100mAh.

Compared with traditional microscope, it uses LiPo Battery as its power source and it has following new functions: measurement, conservation, copy and transfer of images and video. And it can work for a long time with the high-capacity LiPo Battery. Its professionalism and practicability make up for the shortage of traditional microscope.

The LiPo Battery LP902360 used in it makes It be small, light and easy to operate. Digital Wi-fi Microscopes greatly simplify the workflow for users and improve their work efficiency. It can be used with all the most popular smartphones, tablet and even with PC. Because it is convenient to use, it will be used in more and more fields. It can be used in Industrial Inspection, Electronics/mechanical assembly and quality control, Printing Inspection, Textile inspection, Collections/jewelry Inspection and so on.

Specs

Part NumberLP902360
Capacity3.7V @ 1100mAh
Configuration1S1P
WiresAWG26 50mm
Protection Circuit Overdischarge Trip Voltage3.0V
Thermistor (NTC)103AT 10K
Dimension9.0 x 23 x 60mm
Charge Temperature0°C to +45°C
Disharge Temperature-20°C to +60°C
Storage Temperature-20°C to +45°C

Similar Lipo Battery

Lipo BatteryDimension(mm)Capacity(mAh)
LP9024509.0 x 24 x 501100
LP9525409.5 x 25 x 40850
LP9022489.0 x 22 x 48650