Lipo Battery Connector Types

 

Both JST & Molex connector types are available!

Essential characteristics lipo battery connector types:
Firstly, lipo battery connector types are designed for compatibility with the power intake point of user device and charging equipment.
Secondy, the two components (male and female) of lipo battery connector types are shaped to guarantee against accidental reverse polarity connection which might damage the battery or the device’s circuits.

Thirdly, the general form is adapted for a reliable, quick and safe detachment of battery for purposes of replacement or to facilitate separate charging.

Therefore, the connector must be secure and able to endure multiple instances of coupling and decoupling without the use of screwdrivers or soldering tools. For heavy duty projects, lipo battery connector types are made of low-resistance components that are able to handle high currents without heating. For example, JST and Molex connectors. The elements of both lipo battery connector types have a high current capability, while the pin to socket link is reliably firm. And coupling is reverse-protected by beveled connector edges, a groove and ridge technique, or both. However, extra attention to the cable polarity is needed because the male connector’s pins could come fitted into the improper sockets. These can be swapped with ease. Most of all, both JST and Molex battery connector are remarkably compact, allowing maximum economy of space in small projects.

Molex 51021-0200

The most popular lipo battery connector type.

See Datasheet

Molex 51021-0300

The most popular 3P connector  with NTC connection.

See Datasheet

JST SHR-02V-S-B

It’s much smaller lipo battery connector type with pitch 1.0mm.

See Datasheet

JST SHR-03V-S-B

It’s much smaller 3P connector with pitch 1.0mm and NTC.

See Datasheet

JST ACHR-02V-S

It’s the smallest connector for connection PCB and li-poly battery in a limited space.

See Datasheet

JST ACHR-03V-S

It’s the best connection solution for connection in narrow application.

See Datasheet

Molex 50-37-5023 (5264-02)

It’s a popular battery connector with pitch 2.5mm and friction lock for wire to board.

See Datasheet

Molex 50-37-5033 (5264-03)

It’s a popular lipo battery connector with pitch 2.5mm and friction lock for wire to board and NTC/thermister.

See Datasheet

JST PHR-2

Also named PH-2. The dimple at the center of the contact ensures positive contact and low contact resistance for lithium battery at all times.

See Datasheet

JST PHR-3

Also called JST PH-3. The dimple at the center of the contact ensures positive contract and low contact resistance for li-poly batteries at all times.

See Datasheet

JST XHP-2

Also called JST XH-2. It’s high reliability and versatility for lipo battery with 2P and clips.

See Datasheet

JST XHP-3

Also called JST XH-2. It’s a high reliability and versatility for lipo battery with 3P and clips.

See Datasheet